Re: [IRCA] Morse Code on 1220 ??

[Mike Hardester <DX4EVR@xxxxxxxxxxxxx>]

Doug,

    Can you get a "tape" of the transmission? One of us should be able 
to decipher it. Also, how far are you from ONTARIO, Oregon? I've got the 
ID if you want, but don't want to taint your mind, if you will.

    Mike

Doug Pifer wrote:
> 0318 PDT 
> I'm hearing what sounds like morse code on 1220 khz. The noise floor and signal are pretty close and I haven't been able to decipher it as of yet.  The tone is around 1khz and is consistant with no lengthy breaks.  Direction is primarily NW/SE. I can hear it through semi-local KPJC in Salem, in the AM mode as well as a little better using CW. I don't know if it's data or what. The skill of the sender doesn't appear to be all that good and it appears to be in the 5-10 wpm range, but it's inconsistant. Ideas? Thanks.
> 73- Doug Pifer
>   


_______________________________________________
IRCA mailing list
IRCA@xxxxxxxxxxxxxxxx
http://montreal.kotalampi.com/mailman/listinfo/irca

Opinions expressed in messages on this mailing list are those of the original contributors and do not necessarily reflect the opinion of the IRCA, its editors, publishing staff, or officers

For more information: http://www.ircaonline.org

To Post a message: irca@xxxxxxxxxxxxxxxx