[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [IRCA] Tone Testers on 1610/1020 and 590 - Direction Finding -other options
- Subject: Re: [IRCA] Tone Testers on 1610/1020 and 590 - Direction Finding -other options
- From: "Neil Kazaross" <neilkaz@xxxxxxxxxxxxx>
- Date: Sat, 2 Dec 2006 18:09:58 -0600
My very strong opinion is that this is likely lots more accurate than using
a compass for most of us.
73 KAZ
----- Original Message -----
From: "Tom Jasinski" <amdxer@xxxxxxxx>
To: <irca@xxxxxxxxxxxxxxxx>; <am@xxxxxxxxxxx>
Sent: Saturday, December 02, 2006 12:59 PM
Subject: [IRCA] Tone Testers on 1610/1020 and 590 - Direction Finding -other
options
> We need to refine our direction finding capabilities. My I suggest that
> instead of using compass angles from your location use the deviation angle
> to a known station transmitter site instead. Transmitter site coordinates
> are very accurate. Get a null on a big power house and then retune and
> adjust antenna for a null on the unknown signal. Anyone with a Quantum
> loop or equivalent or a good quality portable radio can easily do this.
>
> For example the test tone on 1020, report your bearing relative to KDKA,
> KYW, WBAL or other easily heard powerhouse in the vicinity. From my
> location the
> signal from the tone tester on 1020 is about ten degrees south of bearing
> to
> KDKA. The
> station on 1610 was a few degrees south of bearing to WTAM on 1100.
>
> The map created by Jim Tonne looks good and is a great idea, lets give
> him more accurate information to use for a better fix on the tone testers.
> Anyone with ideas or suggestions to improve on this are welcome.
>
> Tom Jasinski
> Shorewood, IL
>
>
_______________________________________________
IRCA mailing list
IRCA@xxxxxxxxxxxxxxxx
http://montreal.kotalampi.com/mailman/listinfo/irca
Opinions expressed in messages on this mailing list are those of the original contributors and do not necessarily reflect the opinion of the IRCA, its editors, publishing staff, or officers
For more information: http://www.ircaonline.org
To Post a message: irca@xxxxxxxxxxxxxxxx