[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [IRCA] frequency measurement accuracy
- Subject: Re: [IRCA] frequency measurement accuracy
- From: "N. Hall-Patch" <nhp@xxxxxxxx>
- Date: Sat, 2 Sep 2006 18:04:40 -0700
Quoting Chuck Hutton <charlesh3@xxxxxxx>:
> Is the main AM carrier locked to GPS with IBOC, or is GPS used to set the
> subcarrier frequencies, spacing, guard time, etc? My impression is the
> latter, at least for the installed base of legacy equipment. I bet Barry
> McLarnon can verify that.
Would like to know also about this. Have been working on the belief that the
carrier frequency among others is locked to GPS, and that IBOC stations use
the same frequency determination whether they're using IBOC or not.
>
> Now back to the comparison of Bill's number with yours: the numbers were
> taken 4 or 5 month apart, right? Were you both calibrated right before the
> numbers were taken? If not, there's uncertainty raised by receiver drift,
> and for that matter we couldn't rule out transmitter drift although I'd
> expect that should be smaller.
Not home right now, and the topic's probably getting old for most readers, but
quickly....the R8 needs to be calibrated at the time of the measurement. This
is an instrumentation technique that long predates my own work involvement
with such things.
> I wonder how much drift there is in the R8? Were you to tune to 10,000.400
> and use Spectran to calibrate the R8 against WWV, how long does it take for
> the R8 to drift 1 Hz? 2 Hz? How long had the R8 been on and been stabilizing
> before the 2 numbers were taken?
During the calibration period (which can be on the order of minutes, as some
frequencies are repeated), there seems to be little apparent drift (i.e. < 0.1
Hz as measured using Spectan). I've been surprised to see the R8 stabilize
within less than half an hour, but will look carefully at this upon my
return. Incidentally, I try not to use WWV above 5 MHz due to possible
Doppler effects depending on geomagnetic conditions.
Oh yes, transmitter drift...some do, though back in the early days of
precision frequency measurement, the IBU used to log the big Euros (do I
remember right, Charlie?) and drift was minimal; hence the point of PFM I
thought...you "ID" the station through its repeatable carrier frequency.
>
best wishes,
Nick
_______________________________________________
IRCA mailing list
IRCA@xxxxxxxxxxxxxxxx
http://arizona.hard-core-dx.com/mailman/listinfo/irca
Opinions expressed in messages on this mailing list are those of the original contributors and do not necessarily reflect the opinion of the IRCA, its editors, publishing staff, or officers
For more information: http://www.ircaonline.org
To Post a message: irca@xxxxxxxxxxxxxxxx