[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [IRCA] Reloj Time Slips
- Subject: Re: [IRCA] Reloj Time Slips
- From: "W. Curt Deegan" <WWWR@xxxxxxxxxxxxx>
- Date: Fri, 20 Jan 2006 02:22:53 -0500
Barry,
Interesting catch. Wouldn't you know, after three days of monitoring RR on
1610 and other normal frequencies, tonight I wasn't paying attention.
Still at 0700Z, Jan 20 2006, RR is still off by just what you observe, and
that includes the one on 1610 I've been tracking -- though obviously not
closely enough.
I would suggest 38 seconds late because at the TOH the RR Morse code is
delayed more than other times. With the time tone at 0700:38, the RR was
sent at 0701:01 instead of the approximately 3-6 seconds later at other
times. This would indicate the TOH tone was late rather than early,
otherwise this delay would have been before 0700 instead of after it.
On 950, where I can hear two RR's, they're both off, but also about a half
second apart. Seems setting ones clock by RR may be a chancy
proposition. A half second is bad enough, but 38 seconds leaves a whole
lot to be desired. Still, if all you have is an hour hand, what's the big
deal?
Maybe Fidel is flying his satellites extra high tonight.
Curt
-------
W. Curt Deegan
Boca Raton, (southeast) FL
At 11:36 PM 1/19/2006, you wrote:
>I was checking out 860 and noticed that the time pip on the R Reloj outlet
>there was happening about 22 seconds early (or 38 secs late). Checked
>some other Reloj stations and found the same thing, so apparently it's a
>network problem... or something really wonky is happening in Cuba tonight!
>
>Barry
>
>--
>Barry McLarnon VE3JF Ottawa, ON
_______________________________________________
IRCA mailing list
IRCA@xxxxxxxxxxxxxxxx
http://arizona.hard-core-dx.com/mailman/listinfo/irca
Opinions expressed in messages on this mailing list are those of the original contributors and do not necessarily reflect the opinion of the IRCA, its editors, publishing staff, or officers
For more information: http://www.ircaonline.org
To Post a message: irca@xxxxxxxxxxxxxxxx