[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [IRCA] Audio Optoisolaters
- Subject: Re: [IRCA] Audio Optoisolaters
- From: "W. Curt Deegan" <WWWR@xxxxxxxxxxxxx>
- Date: Thu, 01 Dec 2005 22:22:58 -0500
Take a look at this link:
http://www.bb-elec.com/product_family.asp?FamilyId=1
Be aware that the 9SPOP2 requires power from the attached device
interface. The RS-320 will not work with this adapter because not all
lines are present in the interface. At least that is my assessment. I
have this coupler and it will not work with the RS-320. I think the
9POP4 will, because it uses an external power source. I have not tried
this one, however.
I have used the 9SPOP2 with another computer-to-receiver arrangement and
it worked quite well in eliminating a large part of the computer noise.
Physical placement also helped.
Curt
W. Curt Deegan
John Hunter wrote:
>Hi again, Sorry for the recent barrage of questions but I am trying to
>solve some severe RF-EMI problems. I went ahead yesterday and rolled a
>balun using a core of unknown composition and when I turned on the radio
>and went down into LW I noticed that the LOUD AC buzz that had previously
>plagued that area was completely gone and the band was full of previously
>unheard beacons! It also worked well up to 30 mc.
>Now I am trying to get rid of the noise introduced into my receivers from
>my computer and remember reading that someone had found a place that sold
>Audio Optoisolaters to connect the two together eliminating the
>computer"hash" and monitor noise. Unfortunately I can't find that email or
>any web site that sells them. Does anyone know where I can get one? Any
>help would be greatly appreciated.
>Sincerely,
>John Hunter
>Rossville GA
>
>
>
>
_______________________________________________
IRCA mailing list
IRCA@xxxxxxxxxxxxxxxx
http://arizona.hard-core-dx.com/mailman/listinfo/irca
Opinions expressed in messages on this mailing list are those of the original contributors and do not necessarily reflect the opinion of the IRCA, its editors, publishing staff, or officers
For more information: http://www.ircaonline.org
To Post a message: irca@xxxxxxxxxxxxxxxx