[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [IRCA] Nova Scotia Logs and a question
- Subject: Re: [IRCA] Nova Scotia Logs and a question
- From: DXer <hfdxmonitor@xxxxxxxxx>
- Date: Fri, 2 Dec 2016 09:08:35 -0500
- Delivered-to: archive@xxxxxxxxxxxxxxxxxxxx
- Delivered-to: irca@xxxxxxxxxxxxxxxx
- Dkim-signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20120113; h=mime-version:in-reply-to:references:from:date:message-id:subject:to; bh=edrUstew6V+2OLmGJx0+3p2DCpbJ66gfXcfU2ZNqO+U=; b=oGabY4Foq7PRJ+uVQHI39P3qPFU/p3dldZPi3MUOtW0vC0eIhEmP2iFpsXjgQ32wYV 37a3Q0EQGUYL3hfEQeGhmtQSaIi1JzU0V6jmHqnRozYd+mdkGnIszrx4T+F48JLLENbI o9wE8ob3HM6Ymr17aQBYgtVqIzqMfhJ5H6W4+TVXbi4GpzJIH6rEN0YYgWZtFZADkHGY yKGuv3CSVNqnsYEtKTnh65zXObKV5Ew0bQWFFwb5/4/tS+8vHTqNUZZcjDjO1VAFueN4 UcN57173lU2XaebP0ZBuBoeRaOjPFluXgL2tf+/fWoi1maIgCjkdq/q0ynjh39DJa7I/ js0g==
I just realized you are talking about 'serious' calibration (3-6 Hz). In
this case, I think you need a 'serious' RF signal generator.
Regards,
Vince
Ottawa, ON
On Fri, Dec 2, 2016 at 8:54 AM, DXer <hfdxmonitor@xxxxxxxxx> wrote:
> Hi Mike,
>
> I don't have an Elad, but I see no reason this would not work. Tune to
> WWV, pick the best frequencies available at the time. Zoom out the display,
> so that the 'tip' of the carrier is clearly visible. Use whatever method of
> adjustment your software provides.
>
> Good luck.
>
> Vince
> Ottawa, ON
>
> On Fri, Dec 2, 2016 at 8:40 AM, Michael Yule <michaeldyule@xxxxxxxxx>
> wrote:
>
>> Hi all - sorry for the lack of reports lately - conditions havent been all
>> that great and I havent had as much tome to spend at the dials.
>>
>>
>>
>> The question I have is with respect to calibration of the ELAD. I would
>> like
>> to do a calibration of frequency, but frankly I'm not sure how. I don't
>> have
>> a signal generator, but what occurred to me is that I DO have an old ICOM
>> R7100 with a 10.7Mhz at 5V output. Can I use this? I would really
>> appreciate
>> if anyone would let me know how I might go about doing this. I'm pretty
>> sure
>> that my frequency readout is off by approximately 3-6 Hz, but I have no
>> way
>> at this point of really verifying that. Thanks!
>>
>
_______________________________________________
IRCA mailing list
IRCA@xxxxxxxxxxxxxxxx
http://montreal.kotalampi.com/mailman/listinfo/irca
Opinions expressed in messages on this mailing list are those of the original contributors and do not necessarily reflect the opinion of the IRCA, its editors, publishing staff, or officers
For more information: http://www.ircaonline.org
To Post a message: irca@xxxxxxxxxxxxxxxx