Re: [IRCA] Het on 1050 kHz
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [IRCA] Het on 1050 kHz



My fault for not mentioning this low het on 1050 during good western cx. It 
didn't seem to be .45 KHz low, but was very present and rather strong at 
times, but I could really extract any audio. I need KTBL and if I note the 
het strong again, I'll put more effort into it.

My usual pests on 1050 at night under good cx with the western Phased BOG 
System are KLOH and CKSB

73 KAZ Barrington IL
----- Original Message ----- 
From: "Albert Lehr" <aelehr@xxxxxxxxxxxxxxxx>
To: <irca@xxxxxxxxxxxxxxxx>
Sent: Friday, November 04, 2005 4:11 PM
Subject: [IRCA] Het on 1050 kHz


> Mike,
>
> I  mentioned in my reply of 08/10/05 that I had found a carrier about 450 
> Hz
> below 1050, but that it was way too weak to hear any audio.  I was never 
> able
> to get any audio from it after many tries.
> A few weeks ago somebody on one of the lists said that it was KTBL-1050
> in Los Ranchos de Albuquerque, NM.
>
> Albert Lehr
>
>
> ----- Original Message ----- 
> From: "Michael Hawkins" <downsized99@xxxxxxxxx>
> To: "Mailing list for the International Radio Club of America" 
> <irca@xxxxxxxxxxxxxxxx>
> Sent: Thursday, November 03, 2005 12:28 AM
> Subject: Re: [IRCA] Need help with a unID station on 1300
>
>
>> I can't hear KAZN here at all...I used to.  Now KYNO's howl even muffles
>> KYNO audio. It's been that way for months.  There's somebody on 1050 
>> who's
>> not quite on 1050 either, but I don't know who that is.  I asked Albert 
>> Lehr
>> about that months ago, but never heard anything back.
>>
>> Mike Hawkins
>

_______________________________________________
IRCA mailing list
IRCA@xxxxxxxxxxxxxxxx
http://arizona.hard-core-dx.com/mailman/listinfo/irca

Opinions expressed in messages on this mailing list are those of the original contributors and do not necessarily reflect the opinion of the IRCA, its editors, publishing staff, or officers

For more information: http://www.ircaonline.org

To Post a message: irca@xxxxxxxxxxxxxxxx