Re: [IRCA] Drake R8A MW listening
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [IRCA] Drake R8A MW listening



Hi All

The address for the IRCA bookstore is:  IRCA Bookstore
                                                       9705 Mary NW
                                                       Seattle, WA  
98117-2334




Bill Block
Prescott Valley, AZ




>From: C B <bevdxer@xxxxxxxxx>
>Reply-To: Mailing list for the International Radio Club of 
>America<irca@xxxxxxxxxxxxxxxx>
>To: Mailing list for the International Radio Club of 
>America<irca@xxxxxxxxxxxxxxxx>
>Subject: Re: [IRCA] Drake R8A MW listening
>Date: Tue, 2 Aug 2005 17:49:04 -0700 (PDT)
>
>Alan,
>
>I bought mine from the IRCA Bookstore. It was an
>address in Seattle, as I recall. I'll dig around for
>the address and send it along when I find it.
>
>73
>
>Craig
>
>--- Alan Bosch <labosch@xxxxxxxxxxx> wrote:
>
> > CB:
> >
> > How can I access those IRCA technical manuals?
> >
> > All that Google came up with was an index to what
> > seems to be #4 in a
> > series?
> >
> > Thanks.
> >
> > AlanB
> >
> > C B wrote:
> >
> > >Greetings Lenny,
> > >
> > >While you are checking out your antenna
> > connections,
> > >it may be worthwhile to verify that they are not
> > >oxidized. De-Oxit works well for this. Impedance
> > >transformers, ICE, Mini-Circuits or hand wound
> > >transformers feeding coax may also help. I am in
> > the
> > >process of gathering materials to put together and
> > >install  RF chokes at termination points of my
> > >antennas to minimize signal pick up from the coax
> > >lead-ins. I also use an RF shielded Isotel outlet
> > box.
> > >You may be receiving noise from the electrical cord
> > >for your R8A. I think you can get ferrite snap-on
> > >chokes for your electrical cord. I haven't tried
> > those
> > >yet. A good ground for your antenna(s) can also
> > help.
> > >After many years of using crummy copper-clad ground
> > >rods, I have switched them out in favor of 1/2"
> > hard
> > >drawn copper tubing which I drive into the ground
> > with
> > >a block of wood to minimize damage to the top of
> > the
> > >tubing. I solder my ground connections with a mini
> > >butane torch as well. I have had my R8A for many
> > years
> > >and IMHO it's the best radio I have owned. IRCA has
> > >published an outstanding series of "IRCA Technical
> > >Manuals" with a splendid variety of informative
> > >articles. If you're comtemplating a phasing unit, I
> > >would heartily recommend Gerry Thomas Quantum
> > Phaser.
> > >It's a great unit.
> > >
> > >73 and Good DX
> > >
> > >Craig
> > >
> > >--- Lenny Silver <len@xxxxxxxxxxxxxxxxxxxxxx>
> > wrote:
> > >
> > >
> > >
> > >>Thanks to all who replied -- you are very generous
> > >>with
> > >>your time.
> > >>
> > >>I walked outside and all around my house with a
> > >>Sangean DT210V,
> > >>a pretty good little pocket radio. I tuned it to
> > >>740, CHWO from
> > >>Toronto. This station usually comes in pretty
> > clear
> > >>in my car
> > >>(a good Pioneer tuner). In the house the best I
> > can
> > >>get is a
> > >>mumble with a lot of noise behind it.
> > >>
> > >>>From about 10-15 feet away from the house and out
> > >>into the back
> > >>yard the station came in at medium strength and
> > >>clear. Any closer
> > >>to the house the noise rose up and drowned it out.
> > >>This was early
> > >>in the morning, televisions, air conditioning,
> > most
> > >>of the lights
> > >>were all off.
> > >>
> > >>My house was built around 1860. The electricity
> > was
> > >>pasted on
> > >>(term carefully chosen) sometime later. At first
> > >>there was one
> > >>large circuit that enters every room. Later other
> > >>circuits were
> > >>pasted on.
> > >>
> > >>In short, I have a noisy house. The solution to
> > the
> > >>noise problem
> > >>is to rewire the house -- not likely to happen.
> > >>
> > >>Next question: given a noisy house, are there
> > noise
> > >>reducers that
> > >>are any help? For example, Universal has an ANC-4:
> > >>
> > >>
> > >>
> > >>
> >
> >http://www.universal-radio.com/catalog/preamps/0094.html
> > >
> > >
> > >>Thanks for any help
> > >>
> > >>Lenny Silver
> > >>_______________________________________________
> > >>IRCA mailing list
> > >>IRCA@xxxxxxxxxxxxxxxx
> >
> >>http://dallas.hard-core-dx.com/mailman/listinfo/irca
> > >>
> > >>Opinions expressed in messages on this mailing
> > list
> > >>are those of the original contributors and do not
> > >>necessarily reflect the opinion of the IRCA, its
> > >>editors, publishing staff, or officers
> > >>
> > >>For more information: http://www.ircaonline.org
> > >>
> > >>To Post a message: irca@xxxxxxxxxxxxxxxx
> > >>
> > >>
> > >>
> > >>
> > >
> > >
> > >__________________________________________________
> > >Do You Yahoo!?
> > >Tired of spam?  Yahoo! Mail has the best spam
> > protection around
> > >http://mail.yahoo.com
> > >_______________________________________________
> > >IRCA mailing list
> > >IRCA@xxxxxxxxxxxxxxxx
> >
> >http://dallas.hard-core-dx.com/mailman/listinfo/irca
> > >
> > >Opinions expressed in messages on this mailing list
> > are those of the original contributors and do not
> > necessarily reflect the opinion of the IRCA, its
> > editors, publishing staff, or officers
> > >
> > >For more information: http://www.ircaonline.org
> > >
> > >To Post a message: irca@xxxxxxxxxxxxxxxx
> > >
> > >
> > >
> > >
> > _______________________________________________
> > IRCA mailing list
> > IRCA@xxxxxxxxxxxxxxxx
> > http://dallas.hard-core-dx.com/mailman/listinfo/irca
> >
> > Opinions expressed in messages on this mailing list
> > are those of the original contributors and do not
> > necessarily reflect the opinion of the IRCA, its
> > editors, publishing staff, or officers
> >
> > For more information: http://www.ircaonline.org
> >
> > To Post a message: irca@xxxxxxxxxxxxxxxx
> >
> >
>
>
>
>
>____________________________________________________
>Start your day with Yahoo! - make it your home page
>http://www.yahoo.com/r/hs
>
>_______________________________________________
>IRCA mailing list
>IRCA@xxxxxxxxxxxxxxxx
>http://dallas.hard-core-dx.com/mailman/listinfo/irca
>
>Opinions expressed in messages on this mailing list are those of the 
>original contributors and do not necessarily reflect the opinion of the 
>IRCA, its editors, publishing staff, or officers
>
>For more information: http://www.ircaonline.org
>
>To Post a message: irca@xxxxxxxxxxxxxxxx
>


_______________________________________________
IRCA mailing list
IRCA@xxxxxxxxxxxxxxxx
http://dallas.hard-core-dx.com/mailman/listinfo/irca

Opinions expressed in messages on this mailing list are those of the original contributors and do not necessarily reflect the opinion of the IRCA, its editors, publishing staff, or officers

For more information: http://www.ircaonline.org

To Post a message: irca@xxxxxxxxxxxxxxxx