Re: [HCDX] Dxers Unlimited´s mid week edition for 6-7 May 2008

["Prof. Arnaldo Coro Antich" <coro@xxxxxxx>]

Dxers Unlimited

Dxers Unlimited´s mid week edition for 6-7 May 2008

By Arnie Coro

Radio amateur CO2KK

Hi mis amigos radioaficionados around the world and orbiting the Earth… 
welcome to the mid week edition of your favorite radio hobby program , 
the one and only covering at one time or another the more than 83 ways 
you and I share our spare time enjoying this wonderful hobby :RADIO…

Si amigos, yes my friends, oui mes amis… here at Dxers Unlimited YOU are 
the center of everything, and that´s why this program has helped many 
listeners to obtain their radio amateur licenses, so that they could 
then operate their own ham radio stations… New radio amateurs from the 
USA, Canada, the UK, France , Germany, Japan, New Zealand, Mexico and 
Brazil among other nations are now enjoying this wonderful aspect of the 
radio hobby, after listening for some time to Dxers Unlimited and 
becoming then interested in amateur radio. As many of us did years ago, 
the newcomers to ham radio started as short wave listeners and they 
continue to enjoy picking up short wave broadcast stations from around 
the world ! Item two: HF propagation, still in the doldrums, but there 
are some good signs of possible improvements in the near future… the 
emergence of new solar data that shows without any possible mistake that 
solar cycle 24 is just stretching its legs and about to start with more 
frequent sunspots … Solar scientists are keeping track of what´s 
happening 93 million miles away from Earth by using sophisticated Sun 
monitoring satellites. One of them under the acronym of

SOHO, Solar Orbiting Heliospheric Observatory, has now exceeded its 
theoretical useful life span, but it is still in such a good shape that 
scientist believe it will provide very important information about the 
now starting up solar cycle…

Item three: As I have said here many times, amateur radio need not be an 
expensive hobby at all… It can be enjoyed by people on a shoestring 
budget, and let me add that sometimes those of us with limited budgets 
seem to enjoy it even more than those who have the opportunity to buy 
the most sophisticated and expensive radios and antenna systems… Take 
for example how just recently a newcomer to amateur radio needed to 
complete a ham radio station in order to be able to obtain his license. 
Here in Cuba you must provide the telecommunications authorities with 
the block and circuit diagrams of your homebrew transmitters or 
transceivers, and after they are approved to comply with the spectrum 
protection regulations, then the radio inspector visits your station and 
performs a test, before the license is extended. The amateur radio 
license lasts for a three year period, and it costs 3 cuban pesos and 33 
cents per year. Well, back to the new radio amateur, he was in a hurry 
to complete his station, he already had a nice professional short wave 
receiver, so in order to obtain his license, he only needed to homebrew 
a simple transmitter, and here it was when he asked for my help… More 
about the ultra simple, minimum parts count CW transmitter than resulted 
from that request in a few seconds, when the midweek edition of Dxers 
Unlimited continues … I am Arnie Coro, radio amateur CO2KK in Havana…

…..

This is Radio Havana Cuba, and here we are on our 47^th year on the air. 
Radio Havana Cuba is has been on the air since 1961, and ever since that 
first day broadcast all our frequencies have been legally registered by 
the Cuban Ministry of Communications until the year 2000 and from the 
year 2000 to this date by the Ministry of Informatics and Communications 
. Cuba is a member nation of the International Telecommunications Union 
and registers the use of all of its broadcasting frequencies with the 
ITU according to the established procedures. And for those ignorant 
persons that are claiming that membership of the so called HFCC or High 
Frequency Coordinating Committee is mandatory, let me underscore that 
the HFCC although recognized by the ITU as a voluntary organization is 
NOT and I repeat this is NOT in charge of registering the frequency 
assignments for international broadcasting for all ITU members. A very 
easy to do on line consultation, will show up immediately that not all

ITU member nations form part of the HFCC, and that the nations that are 
not members, may register and do register their use of the international 
short wave or decametric broadcast band frequencies directly with the 
ITU in Geneva. As a matter of fact the ITU Geneva office runs a complete 
and detailed international short wave broadcasting compatibility program 
that is available to all member nations , so it is in fact available for 
those that form part of the voluntary HFCC group and to those that have 
chosen for one reason or the other to not become part of the so called 
HFCC group.

My advise to those who voice out unsubstantiated and wrong opinions 
about international short wave broadcasting is to learn more first about 
the coordination procedures set up by the ITU before claiming things 
about the non membership of nations on the HFCC.

Every broadcasting period, RHC frequencies are properly registered with 
all the operating parameters requested by the ITU, and that procedure is 
carried on with the proper advance notification by the Cuban Ministry of 
Informatics and Communications , that then receives from ITU Geneva the 
list of how our frequencies were registered and all the possible 
incompatibilities with other administrations frequency registrations, so 
that they can be worked out in such a way that better reception of 
international broadcast stations will result for the listeners.

……

You are listening to the mid week edition of Dxers Unlimited and here is 
now our technical topics section for today… The design, construction and 
actual on the air testing of an incredibly simple amateur radio CW 
transmitter that solved a very practical problem for a newcomer to the 
hobby… because after he finished assembling here at my workshop his 
ultra simple transmitter and power supply, he was able to obtain his 
amateur radio license… As I already explained here at the start of the 
program, Cuban radio amateur regulations prescribe that the person 
requesting to obtain the license to operate and amateur radio station 
must show an actual operating station on the air… The station is then 
inspected and approved for operation, and finally the callsign is issued 
to the new radio amateur..

So , this new ham, Frank, came in and told me that he had a nice short 
wave receiver, but no transmitter, and that he wanted to go on the air 
as soon as possible… I told him that I had a 40 meters band quartz 
crystal, and several recycled components from broken down energy saver 
lightbulbs, plus a stock of other electronic components recovered from 
old TV sets. He was very enthusiastic and ready to wire up his power 
supply and transmitter immediately.

The first step was to draw the block diagram of the power supply and 
transmitter… It was clear that we will be using one of the many 
plentiful locally TV set vacuum tubes that are very rugged and reliable… 
The vacuum tube transmitter required a power supply capable of providing 
voltage to light up the filaments o the tube or valve and high voltage 
for the plate and screen grid of the tetrode tube that once served as 
the horizontal output stage of a black and white TV set.

A power transformer also salvaged from the same black and white TV set 
provided all the voltages required, and in less than three hours we had 
a nice power supply providing 6.3 volts AC at up to 5 amperes, and 
approximately plus 300 volts DC at an incredible half an ampere of 
current… We added a glow discharge regulator tube to provide plus 150 
volts regulated voltage, and then completed the power supply with a 
connecting cable that had a wire for the B plus 300 volts, another one 
for the 150 volts regulated voltage and a wire for the 6.3 volts AC for 
the filaments, the fourth wire was the common ground. The four wires 
ended in a plug that was made from a broken down octal vacuum tube.

The power supply was tested using dummy load resistors, and it worked 
perfectly well from the first moment, so fortunately no wiring errors 
were mad. We used the nice 1N4007 high voltage silicon rectifiers that 
were recycled from the energy savers light bulbs electronics, and the 
electrolytic capacitors came from a retired computer power supply… they 
have a rated capacity of 330 microfarads at 200 volts DC, that is direct 
current working voltage, so we simply put two of them in series to 
obtain an effective capacitance of 165 microfarads at 400 volts DC 
operating voltage. To complete the power supply we used a filter choke 
also removed from the TV set, as well as a nice on off switch and a fuse 
holder . To add some beauty to our power supply we used a bright red LED 
to show the presence of high voltage and a green LED to show that the 
filament was on…For those of you thinking that 300 volts would not be 
enough for the transmitter, let me say that 300 volts at a plate current 
of 100 milliamperes will yield a 30 Watts input power, that in our ultra 
simple transmitter circuit will translate into no less than 10 to 12 
Watts output into the antenna system, a power output that is more than 
enough to be able to work many stations on the 40 meters band…

………..
After we completed and tested the improvised power supply built from 
recycled parts, we started to work on the simply one tube transmitter, 
but always leaving enough space to transform it later into an MOPA 
transmitter later. That is a Master Oscillator Power Amplifier, as they 
were known to the old timers… The single tube transmitter we built so 
that my friend could obtain his ham radio station license uses a TV 
sweep tube and the crystal oscillator in a simple oscillator circuit, 
known among the electronic GURUS as an ECO or electron coupled 
oscillator… The screen grid acts as the plate of a triode oscillator to 
which the quartz crystal is connected, and this improves the stability 
and makes the keying of the oscillator much nicer. We decided to use a 
classic breadboard layout, and after about three hours, the rig was on 
the air, bringing in its first QSO … During the weekend edition of the 
program I will tell you more about this ultra simple transmitter and 
some of the nice DX we worked despite the poor propagation conditions …

And speaking about propagation, here is a short form HF propagation 
update and forecast, solar activity at very low baseline levels, with 
solar flux around 68 to 70 units and a quiet geomagnetic field. So don´t 
expect much DX on20 meters and above during the next several days amigos…

Send you comments about this program to inforhc at enet dot cu or Via 
Air Mail to Arnie Coro, Radio Havana Cuba,

Havana, Cuba


---[Start Commercial]---------------------

Order your WRTH 2008:
http://www.hard-core-dx.com/redirect2.php?id=wrth2008
---[End Commercial]-----------------------
________________________________________
Hard-Core-DX mailing list
Hard-Core-DX@xxxxxxxxxxxxxxxx
http://montreal.kotalampi.com/mailman/listinfo/hard-core-dx
http://www.hard-core-dx.com/
_______________________________________________

THE INFORMATION IN THIS ARTICLE IS FREE. It may be copied, distributed
and/or modified under the conditions set down in the Design Science License
published by Michael Stutz at
http://www.gnu.org/licenses/dsl.html