[HCDX] Antenna wire, suggestions?
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[HCDX] Antenna wire, suggestions?



Hi everyone,

I recently had to move the first part of my Eastern beverage off the
fence to 10-12 feet high. The first 500 feet runs tree limb to tree
limb. I have used #12 single (solid) insulated house wiring for the
antenna as it is inexpensive and heavy duty. It lasts for years out here
on the Oregon coast. Raising my antenna, I have a bit of a problem.
Between two points there is a pretty long run, 100 feet of close to it.
The #12 wiring is heavy. Is there a strong type of wire that is not
quite as heavy and smaller I can use that can handle high winds and all?
I need it insulated to protect it from the elements. The weight of #12
bothers me a lot. Any suggestions? Thanks.

73,

Patrick

Patrick Martin
Seaside  OR
KAVT Reception Manager

---[Start Commercial]---------------------

World Radio TV Handbook 2005 is out. 
Order yours from http://www.amazon.com/exec/obidos/ASIN/0823077942/hardcoredxcom

---[End Commercial]-----------------------
________________________________________
Hard-Core-DX mailing list
Hard-Core-DX@xxxxxxxxxxxxxxxx
http://dallas.hard-core-dx.com/mailman/listinfo/hard-core-dx
http://www.hard-core-dx.com/
_______________________________________________

THE INFORMATION IN THIS ARTICLE IS FREE. It may be copied, distributed
and/or modified under the conditions set down in the Design Science License
published by Michael Stutz at http://dsl.org/copyleft/dsl.txt