[HCDX] DXLabILG A NEW PROGRAM TO INTERACT WITH THE ILG DATABASE AND DXLab AND DXAtlas

["David Michael Gaytko // WD4KPD" <wd4kpd@xxxxxxxxxxxxxx>]

A NEW PROGRAM FOR THE SW DXer AND HIS COMPUTER CONTROLLED RECEIVER BY
'PB5SAM'.

"DXLabILG201" IS A NEW ACCESSORY PROGRAM BASED ON THE ILG DATABASE THAT
INTEGRATES WITH "DXLab" BY 'AA6YQ' , AND "DX ATLAS" (shareware) BY 'VE3NEA'.

THE ESSENCE OF THE PROGRAM IS AN INTERFACE TO THE ILG DATABASE THAT ALLOWS
YOU TO SORT THE DATABASE AS DESIRED, AND SIMPLY BY CLICKING ON THE DESIRED
STATION, YOUR RECEIVER WILL CHANGE MODE AND GO TO THE DESIRED FREQUENCY.  IF
YOU DESIRE, YOU CAN CALL UP DXATLAS TO SHOW YOU THE QTH OF THE TRANSMITTING
SITE, AND THE  DESIGNATED TARGET AREAS FOR THAT TRANSMISSION.

TO CONTROL YOUR RECEIVER, THE "COMMANDER IV" PORTION OF THE DXLab IS
REQUIRED.  THIS PROGRAM RUNS IN THE BACKGROUND AND DOES NOT HAVE TO SHOW ON
THE SCREEN.
CHECK THE DXLab INSTALLATION INFO TO SEE IF YOUR RECEIVER IS SUPPORTED AND
HOW TO CONFIGURE THE PROGRAM. YOU ARE ALSO ENCOURAGED TO DOWNLOAD THE ENTIRE
SUITE OF DXLab PROGRAMS AS FULL INTEGRATION OF DXLabILG IS EXPECTED IN THE
FUTURE.

YOU NEED.....

DXLab "COMMANDER IV"
DXLabILG V1.0.0 (base program)
DXLabILG V2.0.1 (this is the update)
ILG DATABASE (almost all of you know where this may be obtained)
DXATLAS V2.1

1. INSTALL COMMANDER
2. INSTALL DXLabILG AND UPDATE IT
3. PUT THE ILG DATABASE IN THE DXLabILG FOLDER OR YOU CAN CALL IT UP FROM
    ANOTHER DIRECTORY IF IS USED BY ANOTHER PROGRAM.
4. INSTALL DXATLAS
5. RUN COMMANDER AND CONFIGURE IT THEN MINIMIZE IT
6 RUN DXLabILG200a AND CONFIGURE
7.GOOD LUCK !

PS...THIS PROGRAM DOES NOT NEED DXATLAS TO RUN...YOU JUST WONT SEE THE MAPS.
        THIS PROGRAM DOES NOT NEED DXLab COMMANDER TO RUN...BUT THERE WILL
        NOT BE  COMPUTER CONTROL OF RECEIVER.
        I AM SURE I LEFT SOMETHING OUT, BUT FOR SURE, THE PROGRAMS ALMOST
RUN THEMSELVES.


(http://dxlab.ky1v.com/Info/download.htm)
(http://www.i6kzr.it/downloads/dxlab/dxlab.html). Please remember that
version 1.0.0 must be installed for this update to work!

DAVID
WD4KPD

PPS.....DXView V1.71 IS NOW AVLIABLE TO OPERATE WITH DXLabILG.  BRING UP ITS
WINDOW AND YOU WILL SEE THE STATION
            LOCATION, ALONG WITH YOUR HOME QTH AND A GREAT CIRCLE BEARING
LINE.  DOWNLOAD THE DXView144 ARCHIVE, THE 1.7.1 UPDATE
            THE DXCC DATABASE, AND THE WORLD MAPS.


---[Start Commercial]---------------------

World Radio TV Handbook 2003 is out! Order it now!

http://www.amazon.com/exec/obidos/ASIN/0823059677/hardcoredxcom

---[End Commercial]-----------------------
________________________________________
Hard-Core-DX mailing list
Hard-Core-DX@xxxxxxxxxxxxxxxx
http://www2.hard-core-dx.com/mailman/listinfo/hard-core-dx
http://www.hard-core-dx.com/
_______________________________________________

THE INFORMATION IN THIS ARTICLE IS FREE. It may be copied, distributed
and/or modified under the conditions set down in the Design Science License
published by Michael Stutz at http://dsl.org/copyleft/dsl.txt